The board is composed of double-layer galvanized steel sheets and a high-density fiber cement core. Fire resistance is achieved through a two-layer synergistic flame-retardant and heat-insulating system consisting of a steel protective layer and a cement core, resulting in an overall A1 non-combustible rating and a fire resistance limit of over 4 hours. The principle involves three parts:
1. Core Material: The fiber cement itself is non-combustible and possesses a built-in heat absorption and cooling mechanism.
The core material consists of cement, quartz sand, and inorganic mineral fibers, all inorganic and non-combustible materials. It is inherently non-flammable and contains no combustible organic matter. The cement contains a large amount of water of crystallization. When exposed to high temperatures and open flames, this water of crystallization vaporizes, continuously absorbing a large amount of heat and rapidly lowering the board's temperature, slowing heat transfer to the other side of the wall. The water vapor also dilutes the oxygen around the board, inhibiting the continued combustion of fire. At high temperatures, the board will not soften, melt, or drip, preventing the spread of flammable drips and reducing the risk of suffocation in a fire.
2. Dense Sandwich Structure, Blocking Heat Conduction and Radiation: High-density fiber cement, pressed under high pressure, has a fine and uniform internal pore structure with few air gaps and an extremely low thermal conductivity, providing excellent insulation. When a flame burns one side, heat has difficulty penetrating the board to transfer to the adjacent space, effectively preventing the spread of high temperatures for an extended period, protecting equipment and personnel on the other side, and delaying heat damage to the building structure.
3. Double-Sided Galvanized Steel Sheets Isolate Open Flames and Prevent Core Material Powdering and Collapse: The outer galvanized steel sheet has a high melting point, preventing open flames from quickly burning through it and isolating the internal cement core from direct flame impact. At high temperatures, the steel sheet forms a complete and rigid enclosure, firmly locking in the internal cement substrate and preventing the cement from powdering, cracking, and falling off due to heat. Ordinary cement boards are prone to cracking and crumbling at high temperatures, and their fire resistance drops sharply after the insulation layer is damaged. However, the double-layered steel sheets restrain the core material, keeping the wall intact throughout a fire and continuously maintaining the fire-resistant partition effect.




