Fiber Cement Composite Steel Plate for Elevators
The key advantages of fiber cement composite steel plate for elevators lie in their lightweight load-bearing capacity and fire safety. The 9.5mm thick fiber-cement composite steel plates are naturally quite heavy, approximately 20% lighter than traditional concrete slabs. This reduces the elevator load and infrastructure costs. Fire is a major concern for residential elevators. Fiber cement composite steel plate for elevators maintain a compressive strength of 60MPa at temperatures of 1000°C, meeting Class A fire safety requirements. They also have a fire resistance limit of ≥2 hours. In the event of a fire, this provides higher-rise residents with more time to escape, effectively alleviating the time-consuming stair climbing problem.
When purchasing fiber cement composite steel plate for elevators, we'll introduce the following materials and specifications:
Material:
The outer layer can be steel, stainless steel, or galvanized steel. Different steel types are available, including 304 stainless steel and 201 stainless steel, with varying zinc layer thicknesses. The inner layer is a fiber-cement core, primarily for fire protection.
Structure:
The fiber cement composite steel plate for elevators are sandwich-shaped, with two outer steel layers and an inner cement layer, mechanically bonded together. The surface is perforated with fixed spacing and perforations to enhance ventilation.
Size:
The standard size is 1200mm * 2400mm * 9.5mm. If this size is not required, custom cutting is possible, which is very convenient and quick.
Performance:
Impact resistance, fire resistance, explosion resistance, weather resistance, and corrosion resistance are all excellent. For fire protection, select A1 non-combustible material, which offers a fire resistance of 1-4 hours.
Many users are concerned about the installation of fiber cement composite steel plate for elevators. Given the limited space in elevators, will handling and hoisting cause inconvenience? Let's provide a detailed explanation:
During installation, workers can cut the plates according to the elevator's dimensions. This simple cutting process reduces on-site work. Fire-resistant galvanized studs are used for fastening, with screws spaced 10cm apart and margins ≥1.5cm. No wet work is required. Sealant is applied to joints to enhance integrity and prevent cracking. The lightweight plates facilitate slotting for pre-installed piping, avoiding disruptive installation later.
Fiber cement composite steel plate for elevators, with their lightweight, modular design, and quick installation, effectively address the construction challenges of confined spaces like elevators, truly benefiting humanity.
As a professional manufacturer of fiber cement composite steel plate for elevators, we want every user to enjoy high-quality composite steel plate products. Therefore, for users working in confined spaces, we support customization and small-quantity purchases. However, we recommend considering the production scenario and project requirements to avoid purchasing insufficient composite steel plates. Whether purchasing fiber cement composite steel plate for elevators in small or large quantities, product quality must be put first. When purchasing, be sure to check the relevant technical standards and process adaptability, and ensure the purchase quantity while considering the cost.
Hot Tags: fiber cement composite steel plate for elevators, China fiber cement composite steel plate for elevators manufacturers, suppliers, factory, 9 5 Thick Fiber Cement Composite Steel Plate, 9 5mm Thick Composite Fire Protection Board, Blast Proof Fire Resistant Wall Partition, Fire Rated Fiber Cement and Steel Composite Board, Fire Resistant Blastproof Steel Cement Boards, Punching Fiber Cement Composite Steel Plate
You Might Also Like
Send Inquiry